"Template" Quotes from Famous Books
 ... guv'nor"—thus ran his Jeremiad—"in dealin' with these here irregular settin's out, where nothin's not to say parallel with anything else, nor dimensions lendin' theirselves to accommodation. 'Just you let me orfer it in,' I says 'afore the final stitchin' to, or even a paper template in extra cases is a savin' in the end.' Because it stands to reason there goes more expense with an ill-cut squint or obtoose angle, involvin' work to rectify, than cut ackerate in the first go-off. Not but what ruckles may disappear under the tread, only there's ...
— Somehow Good • William de Morgan
... The mode of working is as follows: For shell plates, from five-eighths inch to seven-eighths inch thick, to warm each to a dark red heat before rolling, having previously drilled a few holes to template for bolting the strakes together; the longitudinal seams are usually lap joints treble riveted, requiring the corners to be thinned, which is done after rolling. The furnace plates are generally welded two plates in length, and flanged to form Adamson rings, and at the ...
— Scientific American Suppl. No. 299 • Various
... in. in length. The current is collected by four brushes. The fitting and mechanical build of the dynamos leaves nothing to be desired. All the working parts of the dynamos and engines are turned up to gauge and template, so as to be interchangeable. As an instance of this, the armature of the generator was built in the works, while the field magnets were being erected in the exhibition, and, on arrival, fitted in position perfectly, and ran ...
— Scientific American Supplement, No. 711, August 17, 1889 • Various
... the work had been done that there had been little inaccuracies in driving the gauge spike, to which the rail was thrown, probably from various causes. The rail to be moved may not always have been exactly in its proper place, and then the template in the hurry may not have been accurately placed, or the spike may have ...
— Scientific American Supplement, No. 623, December 10, 1887 • Various |
