"Lathe" Quotes from Famous Books
 ... of this forenoon. The fish-hawk sailed and screamed overhead. The chipping or striped squirrel, Sciurus striatus (Tamias Lysteri, Aud.), sat upon the end of some Virginia fence or rider reaching over the stream, twirling a green nut with one paw, as in a lathe, while the other held it fast against its incisors as chisels. Like an independent russet leaf, with a will of its own, rustling whither it could; now under the fence, now over it, now peeping at the voyageurs ...
— A Week on the Concord and Merrimack Rivers • Henry David Thoreau
... use a hot-water bottle, and he announced that he would have the sleeping-porch wired at once. He had enormous and poetic admiration, though very little understanding, of all mechanical devices. They were his symbols of truth and beauty. Regarding each new intricate mechanism—metal lathe, two-jet carburetor, machine gun, oxyacetylene welder—he learned one good realistic-sounding phrase, and used it over and over, with a delightful feeling of being technical ...
— Babbitt • Sinclair Lewis
... somewhere in America, but everywhere to-day, Where snow-crowned mountains hold their heads, the vales where children play, Beside the bench and whirring lathe, on every lake and stream And in the depths of earth below, men share a common dream— The dream our brave forefathers had of freedom and of right, And once again in honor's cause, ...
— Over Here • Edgar A. Guest
... and Hope retired behind his lathe to study his model in peace, Monckton raged at the sight of him and ...
— A Perilous Secret • Charles Reade
... around the room. There was a bench at one side, near a window; and there were a great many tools upon it, and upon shelves over it. On another side of the shop was a lathe, a curious sort of a machine, that the corporal used a great deal, in some of his nicest work. Then there were a good many things there, which were sent in to be mended, such as chairs, a spinning-wheel, boys' sleds, and one or two ...
— Rollo at Work • Jacob Abbott
... horrid stair, and entered his studio and a marvelous place it was: a forge on one side, a carpenter's bench and turning-lathe on the other and the floor so crowded with models, castings, and that profusion of new ideas in material form which housewives call litter, that the artist had been obliged to cut three little ramified paths, a foot ...
— Put Yourself in His Place • Charles Reade
... Perigal helped me twenty years ago with the diagrams, direct from the lathe to the wood, for the article "Trochoidal Curves," in the Penny Cyclopaedia: these cuts add very greatly to the value of the article, which, indeed, could not have been made intelligible without them. He has had many years' experience, as an amateur turner, ...
— A Budget of Paradoxes, Volume II (of II) • Augustus de Morgan
... the room were occupied respectively by a turning-lathe, a Rhumkorff Coil, a small steam-engine and an orrery in stately motion. Tables, shelves, chairs and floor supported an odd aggregation of tools, retorts, chemicals, gas-receivers, philosophical instruments, boots, flasks, ...
— Stories by American Authors, Volume 5 • Various
... Water-works, visited Smeaton and could not conceal his astonishment at the mechanical skill displayed by the young engineer; he forged his iron and steel, and melted his metal; he had tools of every sort for working in wood, ivory, and metals. He had made a lathe, by which he had cut a perpetual screw in brass, a thing very little known at that day. All these resources were not furnished to him by rich and wealthy parents, nor had he the advantage of masters in his various pursuits; on the contrary, by the strength of his genius, ...
— Smeaton and Lighthouses - A Popular Biography, with an Historical Introduction and Sequel • John Smeaton
... a bank-note is doubted, the Lathe Work on the note should first be closely scrutinized. The several letters of denomination, circles, ovals, and shadings between and around the letters in the words, etc., are composed of numberless extremely ...
— Burroughs' Encyclopaedia of Astounding Facts and Useful Information, 1889 • Barkham Burroughs
... accidental experiment set me on trying my skill in the mechanical arts. Accordingly I took down and cleaned my landlady's cuckoo-clock, and in so doing, silenced that companion of the spring for ever and a day. I mounted a turning-lathe, and in attempting to use it, I very nearly cribbed off, with an inch-and-half former, one of the fingers which the hussar ...
— The Monastery • Sir Walter Scott
... machines designed by the Volta associates had the disc mounted vertically (see figs. 5 and 6). The explanation is that in the early experiments, the turntable, with disc, was mounted on the shop lathe, along with the recording and reproducing heads. Later, when the complete models were built, most of them featured ...
— Development of the Phonograph at Alexander Graham Bell's Volta Laboratory • Leslie J. Newville
... paint and brushes and taken down the lathes from the drying frames. The two men now proceeded with the painting of the blinds, working rapidly, each lathe being hung on the wires of the drying frame after being painted. They talked freely as they worked, having no fear of being overheard by Rushton or Nimrod. This job was piecework, so it didn't matter whether they ...
— The Ragged Trousered Philanthropists • Robert Tressell
... in a lathe," said the Chief profoundly, "to hold the chucks. The chucks have got to be these same bearings, because nothing else will stand the speed. And we got to cut out the bed plate of any lathe we find. Hm. We got to do our spinning ...
— Space Platform • Murray Leinster
... to be contrived so as to prevent any escape of the emanations through joints. It is lathe turned and circular, a 'dead fit.' By means of a special contrivance any slight looseness caused by wear and tear of closing can be adjusted. And another feature. That is the appliance for preventing the loss of emanation when the door is opened. Two valves have been inserted ...
— The War Terror • Arthur B. Reeve
... on, incoherent but glowing. She liked her big turret lathe. It gave her a sense of power. She liked to see the rough metal growing smooth and shining like silver under her hands. She was naively pleased that she was doing a man's work, ...
— Dangerous Days • Mary Roberts Rinehart
... above, but so hardened by the power of heat, that it is almost impossible to break off the smallest piece; and, though porous in texture, and full of air-holes and cavities, like other bricks, they require, on being submitted to the stone-cutter's lathe, the same machinery as is used to dress the ...
— Fables of Infidelity and Facts of Faith - Being an Examination of the Evidences of Infidelity • Robert Patterson
... complete stock of tools. Jimmy's father had made them a wooden form on which to wind the wire. This core was nothing but a plain cylinder of wood, about three inches in diameter and ten inches long. For Christmas, the year before, Mr. Layton had given Bob a small but accurately made bench lathe, operated by a foot pedal, and Bob mounted the roller between the lathe centers, holding one end in the chuck jaws. Then he produced a narrow roll of stout wrapping paper, such as is used for winding around ...
— The Radio Boys' First Wireless - Or Winning the Ferberton Prize • Allen Chapman
... very top of the firmament and even beyond the stars composing the Great Bear, the other on the opposite side under the earth in the regions of the south. Round these pivots (termed in Greek [Greek: poloi]) as centres, like those of a turning lathe, she formed the circles in which the heaven passes on its everlasting way. In the midst thereof, the earth and sea naturally occupy the ...
— Ten Books on Architecture • Vitruvius
... a little longer, and not to be fastened, as it must be taken out for every operation. The outer end of this is cut down into a shape to be taken into the mouth, or attached to the pipe of a bellows. (I fitted them in the turning lathe, but have seen them fixed very nicely without.) It could all be made of tin; but then it is necessary to use solder, which is liable to melt and ...
— Mysteries of Bee-keeping Explained • M. Quinby
... dite Carabine, as the mistress en titre of the Amphitryon, was one of the first to arrive; and the brilliant lighting showed off her shoulders, unrivaled in Paris, her throat, as round as if turned in a lathe, without a crease, her saucy face, and dress of satin brocade in two shades of blue, trimmed with Honiton lace enough to have fed a whole ...
— Cousin Betty • Honore de Balzac
... he. "It will be a buster, too! I'll show 'em a thing or two 'round here. I mean to run a lathe with it here at the shop and do wood turning. I'll turn banisters, rolling-pins, gingerbread creasers and all sorts of things. I can make lots of money off a lathe. I'm going to set the wind-mill up on ...
— When Life Was Young - At the Old Farm in Maine • C. A. Stephens
... Bush to these bushel-bellied casks of wine, Home-growth, 'tis true, but rank as turpentine,— What would we with such skittle-plays at death % Say, must we watch these brawlers' brandished lathe, Or to their reeking wit our ears incline, Because all Castaly flowed crystalline In gentle Shakspeare's modulated breath! What! must our drama with the rat-pit vie, Nor the scene close while one is left to kill! Shall this be poetry % And thou—thou—man ...
— Recollections of Dante Gabriel Rossetti - 1883 • T. Hall Caine
... hand-formed pipe. Most of the tools were blacksmith's tongs and hammers for heating and beating out shapes on the anvil. The only things that gladdened Jason's heart were the massive drill press and lathe that worked off the slave-power drive belts. In the tool holder of the lathe was clamped a chip of some hard mineral that did a good enough job of cutting the forged iron and low-carbon steel. Even more cheering was the screw-thread advance on the cutting head ...
— The Ethical Engineer • Henry Maxwell Dempsey
... made in Barbary from Date stones turned in a lathe; or when soaked in water for a couple of days the stones may be given to cattle as a nutritious food, being first ground in a mill. The fodder being astringent will serve by its tannin, which is abundant, to cure ...
— Herbal Simples Approved for Modern Uses of Cure • William Thomas Fernie
... to lose her superiority as a manufacturing country, inasmuch as her vast store of coals will no longer avail her as an economical source of motive power. "We," say the German cultivators of this science, "have cheap zinc, and, how small a quantity of this metal is required to turn a lathe, and consequently to give motion to any kind ...
— Familiar Letters of Chemistry • Justus Liebig
... cell,' he wrote to his brother, 'I read, I write, I meditate, I pray, I paint, I carve'. His interest in astronomy was resumed, and he set himself to make dials for pocket use, on metal rings or on round wooden sticks. The latter he turned for himself upon a lathe; and for this work John sent him a present of boxwood, juniper, and plane. By the New Year of 1523 he had made two sundials; one which showed the time on five sides at once, he sent to John at Wurtzen, the other to Barbara at ...
— The Age of Erasmus - Lectures Delivered in the Universities of Oxford and London • P. S. Allen
... image of his mind at this epoch. Rejected pictures looked down upon his clumsy apparatus, type-moulds lay among plaster-casts, the paint-pot jostled the galvanic battery, and the easel shared his attention with the lathe. By degrees the telegraph allured him from the canvas, and he only painted enough to keep the wolf from the door. His national picture, 'The Signing of the First Compact on Board the Mayflower,' was never finished, and the 300 dollars which had been ...
— Heroes of the Telegraph • J. Munro
... am made of mahogany," said the Top; "and the mayor himself turned me. He has a turning-lathe of his own, and ...
— Library Of The World's Best Literature, Ancient And Modern, Vol. 2 • Charles Dudley Warner
... immediately set up a great shout, and mingling the lime with water, rubbed their faces and their bodies all over with it, and ran through the village screaming with delight. They were also much surprised at another thing they saw me do. I wished to make some household furniture, and constructed a turning-lathe to assist me. The first thing that I turned was the leg of a sofa, which was no sooner finished than the chief seized it with wonder and delight, and ran through the village exhibiting it to the people, who ...
— The Coral Island • R.M. Ballantyne
... much the same manner that the sockets of a gun-carriage hold the trunnions of a gun. What struck Rayburn as especially remarkable was the trueness to a circle of both the sockets and the bar; both showing, as he declared, that they had been worked upon a lathe. And he was puzzled, as in the case of the sword, as to the composition of the metal that thus defied oxidization through long periods of time. "Gold is the only thing that fills the bill," he said; "but a bar of gold, even ...
— The Aztec Treasure-House • Thomas Allibone Janvier
... whistle sounded at noon the machinery stopped running, and the workers all dropped their tools. A few quickly drew their coats on, intending to go home for a mouthful of warm food, while some went to the beer-cellars of the neighborhood. Those who lived far from their homes sat on the lathe-beds and ate their food there. When the food was consumed they gathered together in groups, gossiping, or chaffing one another. Pelle often made use of the midday rest to run over to the "Ark" in order to greet ...
— Pelle the Conqueror, Complete • Martin Andersen Nexo
... into the large shed which had been floored with boards and lined, so as to turn it into quite a respectable workshop, in which were, beside a great heavy deal table in the centre, a carpenter's bench, and a turning lathe, while nails were knocked in everywhere, shelves ran from end to end, and the place presented to the eye about as strange a confusion of odds and ends as could have been seen out ...
— The Weathercock - Being the Adventures of a Boy with a Bias • George Manville Fenn
... young man," replied Doctor Gordon. "They are wood. Aaron made them on a lathe, and not a soul can tell them from the clay pigeons unless they handle them. Now you are going to see some fun. Jim Goodman, who is the meanest skunk in town, has cheated every mother's son of us first and last, and this afternoon ...
— 'Doc.' Gordon • Mary E. Wilkins-Freeman
... Mary John answered. "And as for work, I have been thinking I might teach her a little carpentry. If plain carpentry does not interest her sufficiently, she might learn to work at the lathe." ...
— Sister Teresa • George Moore
... imbedded in which are wonderful cheese-shaped nodules, some the size of baseballs, some as big as mill-stones. The river-bed is strewn thick with these concretions from which the swift current has worn the softer matrix away, and many of the stones are as spherical as if turned out by a hand-lathe. The sandstone banks opposite the island are overlain with a stratum of lignite three or four feet thick, which burns freely and makes acceptable fuel. Sections of fossil trees are also seen, and the whole thing is fascinating, one's great wish being for a larger knowledge ...
— The New North • Agnes Deans Cameron
... be executed by Babbit at Boston, as well as at the celebrated foundries at Berlin. This casting is then placed in an instrument called a portrait lathe (of which we have a very perfect one at the Mint, which I caused to be made at Paris), and reduced fac-similes of it are turned by the lathe, thus preparing for us the dies ...
— The Medallic History of the United States of America 1776-1876 • J. F. Loubat
... an old "monkey," that drove the piles for the Suakim landing stage in 1884; the two cylinders are from an effete ice machine, and the steam and exhaust pipes come from a useless locomotive of the old railway. A lathe, a beautiful piece of workmanship, is fashioned out of one of the guns found at Tamai. And the building which covers these useful implements was erected by this clever engineer in the Sirdar's service, who had utilized the rails of the old Suakim-Berber line as ...
— Scientific American Supplement, No. 1157, March 5, 1898 • Various
... "the Curriculum," as Mr. Veal loved to call it, was of prodigious extent, and the young gentlemen in Hart Street might learn a something of every known science. The Rev. Mr. Veal had an orrery, an electrifying machine, a turning lathe, a theatre (in the wash-house), a chemical apparatus, and what he called a select library of all the works of the best authors of ancient and modern times and languages. He took the boys to the British Museum ...
— Vanity Fair • William Makepeace Thackeray
... it cast intelligence into the gutter, and raise ignorance to the skies? Does it imprison virtue, and laud vice? Did luck give Watt his engine, Franklin his captive lightning, Whitney his cotton-gin, Fulton his steamboat, Morse his telegraph, Blanchard his lathe, Howe his sewing-machine, Goodyear his rubber, Bell ...
— Pushing to the Front • Orison Swett Marden
... fancy I might as well inquire whether the fiddle or fiddlestick makes the tune. In youth this complaint used to throw me into involuntary passions of causeless tears. But I will drive it away in the country by exercise. I wish I had been a mechanic: a turning-lathe or a chest of tools would have been a God-send; for thought makes the access of melancholy rather worse than better. I have it seldom, thank God, and, I believe, lightly, in ...
— The Journal of Sir Walter Scott - From the Original Manuscript at Abbotsford • Walter Scott
... workman Advanced to be foreman of the works His inventions of tools required for lock-making His invention of the leathern collar in the hydraulic press Leaves Bramah's service and begins business for himself His first smithy in Wells Street His first job Invention of the slide-lathe Resume of the history of the turning-lathe Imperfection of tools about the middle of last century The hand-lathe Great advantages of the slide rest First extensively used in constructing Brunel's Block Machinery Memoir of ...
— Industrial Biography - Iron Workers and Tool Makers • Samuel Smiles
... neglected. I have seen staffs that were models as regards execution and finish, that were nearly worthless from a practical standpoint, simply because the maker had devoted all his time and energy to the execution of a beautiful piece of lathe work, and had given no thought or study to the form and size of the pivots. On the other hand, one often sees staffs whose pivots are faultless in shape, but the execution and finish so bungling as to offset all the good qualities as regards shape. To have good tools and the right ideas is one ...
— A Treatise on Staff Making and Pivoting • Eugene E. Hall
... where more skill than strength is called for, the American element with its quick wits and deft fingers predominates. Young women are working at the lathe with so much precision and accuracy that solicitude as to what would become of the world if all its men marched off to war is in a measure assuaged. In the push and drive of the industrial world, women are handling dangerous chemicals ...
— Mobilizing Woman-Power • Harriot Stanton Blatch
... before the other sick man was awake. As they came up to the foot of my cot and sat the stretcher down, I thought I would play a joke on them. I pulled the sheet over my face, and laid still. One of the men said, "Two of us can lift it, as it is thinner than a lathe." To be considered dead, when I was alive, was bad enough, but to be called "it" was too much. I felt one of the men take hold of my feet, and then I threw the sheet off my face and in a hoarse voice I said, "Say, Mr. Body-snotcher, you can postpone the funeral and bring ...
— How Private George W. Peck Put Down The Rebellion - or, The Funny Experiences of a Raw Recruit - 1887 • George W. Peck
... above you. Across the valley, nearly opposite, rise the Cathedral Rocks to nearly the same height, while farther along, beyond El Capitan, the Three Brothers shoulder the sky at about the same dizzy height. Near the head of the great valley, North Dome, perfect in outline as if turned in a lathe, and its brother, the Half Dome (or shall we say half-brother?) across the valley, look down upon Mirror Lake from an altitude of over four thousand feet. These domes suggest enormous granite bubbles if such were possible pushed up from below and retaining their forms through the vast geologic ...
— Time and Change • John Burroughs
... not enough for the active mind of the boy, who kept himself busy at a dozen labors. He used to hammer and forge in the blacksmith's shop, became an expert with the lathe, and learned the art of printing and binding books. He built himself a wheelbarrow and other articles which he needed, and at a later date it was said that he "knew ...
— Historic Tales, Vol. 8 (of 15) - The Romance of Reality • Charles Morris
... style known as Empire when revived by Napoleon I was at that time in vogue. Even more remarkable is the fact that parts of legs and rails of furniture were turned as perfectly (I quote Litchfield) as if by a modern lathe. The variety of beautiful woods used by the Egyptians for furniture included ebony, cedar, sycamore and acacia. Marquetry was employed as well as wonderful inlaying with ivory, from both the elephant and hippopotamus. ...
— The Art of Interior Decoration • Grace Wood
... no machine lines—no lines filed out in iron or cut by the lathe to the draughtsman's design, drawn with straight-edge and ruler on paper. The thing has been put together bit by bit: how many thousand, thousand clods must have been turned in the furrows before the idea arose, and the curve to be given to this or that part grew upon the mind as the branch grows ...
— Nature Near London • Richard Jefferies
... passed along, pointed out the various quarters of the establishment: "This is the setting-up room, these the workshops of the great lathe and little lathe, the braziery, the forges, the foundry." He had to shout, so ...
— Library of the World's Best Literature, Ancient and Modern — Volume 11 • Various
... and at sea; you have sent God knows how many lads to their death—and women and children, too. You have helped to blow up munitions-plants, and on your white heads is the blood of many and many a poor wretch torn to pieces at his lathe. You have made widows of women and orphans of children who never heard of you, nor you of them. Nor have you ...
— The Cup of Fury - A Novel of Cities and Shipyards • Rupert Hughes
... used the ashes were deposited in an urn made of rude earthenware without the help of a lathe. Drinking-vessels of glass of fine and delicate workmanship, pointed or rounded at the bottom, are common. From the construction of these cups it is evident that the Saxon allowed no "heel-taps." Bronze ...
— English Villages • P. H. Ditchfield
... and house-building, and in other branches of the art of carpentering, the builder has his rule, lathe, compass, line, and a most ingenious machine for ...
— Philebus • Plato
... in her light curls and blue ribbons, and the becoming dress which could not help betraying the modestly emphasized crescendos and gently graded diminuendos of her figure. She was as round as if she had been turned in a lathe, and as delicately finished as if she had been modelled for a Flora. She had naturally an airy toss of the head and a springy movement of the joints, such as some girls study in the glass (and make dreadful work of it), so that she danced ...
— The Guardian Angel • Oliver Wendell Holmes, Sr.
... cloth round the waist reaching to the knee, which in some instances was neatly ornamented with small white shells; their arms and ankles were loaded with rings formed of ebony, ivory, and coloured glass, some of the former bore evident marks of having been turned in a lathe. The lobes of their ears were perforated with large holes, from which enormous earrings of ivory and ebony, in the shape of padlocks, were suspended, sometimes as many as three from one ear. A few of the natives had gold earrings of considerable size but ...
— Discoveries in Australia, Volume 1. • J Lort Stokes
... contrivances in our own country, I regarded as altogether as conclusive of an identity of mind in the individuals who had originated them, as if I had actually seen human creatures at work on them all. One class of productions showed me that the potter's wheel and the turning lathe had been known and employed as certainly in China and ancient Egypt as in Britain. Another, that their weaving processes must have been nearly the same. The Chinese know, for instance, as well as ourselves, ...
— The Testimony of the Rocks - or, Geology in Its Bearings on the Two Theologies, Natural and Revealed • Hugh Miller
... the name of their caste they not infrequently say that they are Rajputs; but they allow widows to remarry, and their social customs and position are generally the same as those of the Barhais. Both names of the caste are functional, being derived from the Hindi kund, and the Arabic kharat, a lathe. Some of them abstain from flesh and liquor, and wear the sacred thread, merely with a view to improve their social position. The Kunderas make toys from the dudhi (Holarrhena antidysenterica) and huqqa stems from the wood of the khair or catechu tree. The toys are commonly ...
— The Tribes and Castes of the Central Provinces of India—Volume I (of IV) • R.V. Russell
... wheels similar to those used in a foot lathe, that will answer for sharpening fine tools, such as gouges, rounds, and hollows, and if so, how ...
— Scientific American, Volume XXIV., No. 12, March 18, 1871 • Various
... castle." The King looked at him, and because he pleased him, he said: "You can ask for three things, none of them living, and those you may take with you into the castle." Then he answered: "Well, I shall beg for a fire, a turning lathe, and a carving ...
— The Blue Fairy Book • Various
... bring the money back with her, and she waited a long while in the stuffy passage of the Contessa's flat. There were imitation Abyssinian trophies on the walls, lances and daggers and shields of lathe and cardboard and painted paper. The husband was an artillery captain, and his sword stood with the umbrellas in the rack, the only real ...
— Olive in Italy • Moray Dalton
... manufacture are of the greatest importance in the progress of an art. The introduction of the lathe, for example, might almost ...
— Origin and Development of Form and Ornament in Ceramic Art. • William Henry Holmes
... nodded and let us go past to where my machine stood. We heard voices back in the repair shop and a hum of swift whirring shafts and pulleys. Worth kept with me. It embarrassed me—made me nervous. It was as though he had some notion of my purpose there. Hughes, at his lathe, caught sight of us ...
— The Million-Dollar Suitcase • Alice MacGowan
... piece of hollow steel tubing was lifted to the boring lathe. Then Tom and the manager ...
— Tom Swift and his Giant Cannon - or, The Longest Shots on Record • Victor Appleton
... schooner of eighty tons, without one single portion of her being in readiness. He taught the natives to cut down, and saw, and plane the wood; then he erected a bellows and forge for the smith's work, which he performed himself; a lathe to turn the blocks, a rope-making machine, and a loom to manufacture the sail-cloth. All the time he laboured, he taught the wondering natives in the truths of Christianity. In three months from the day the keel was laid, this prodigy ...
— The Cruise of the Mary Rose - Here and There in the Pacific • William H. G. Kingston
... cold. It was blue-gray in the first place. In the second, the eyes were rolled back till you could only see the whites of them; and, in the third, the face was the face of a demon—a ghoul—anything you please except of the sleek, oily old ruffian who sat in the daytime over his turning-lathe downstairs. He was lying on his stomach with his arms turned and crossed behind him, as if he had been thrown down pinioned. His head and neck were the only parts of him off the floor. They were nearly at right angles to the body, like the head of a cobra at spring. ...
— The Lock And Key Library - Classic Mystery And Detective Stories, Modern English • Various
... they met another familiar pair and Sabina speculated as to what Raymond thought; but he showed no emotion and took off his hat to Sarah Northover and Nicholas Roberts, the lathe worker, as they passed by. Sarah smiled, and Nicholas, a thin, good-looking man, ...
— The Spinners • Eden Phillpotts
... born of generations of tradition compels a facile reacceptance. They think: "The blood and mud and the hell's delight of the war are things of the past. We take up life where we left it five years ago; we come back to plough, lathe, counter, bank, office, and we shall carry on as though a Sleeping Beauty spell had been cast on the world and we were awakening, at the kiss of the Fairy Prince of peace, ...
— The Mountebank • William J. Locke
... discern the shameful deeds of the Maenads. And on this I now see a strange deed of the stranger; for seizing hold of the extreme lofty branch of a pine, he pulled it down, pulled it, pulled it to the dark earth, and it was bent like a bow, or as a curved wheel worked by a lathe describes a circle as it revolves, thus the stranger, pulling a mountain bough with his hands, bent it to the earth; doing no mortal's deed; and having placed Pentheus on the pine branches, he let it go upright through his hands steadily, taking care that it should ...
— The Tragedies of Euripides, Volume I. • Euripides
... Last but one antauxlasta. Latch pordrisorto, fermilo. Late malfrua. Late, to be malfrui. Late (deceased) mortinto. Lately antaux ne longe. Lateness malfrueco. Latent kasxita. Lateral flanka. Lath paliseto. Lathe tornilo. Lather sapumi. Lather sapumajxo, sxauxmajxo. Latin Latina. Latter lasta, tiu cxi. Lattice palisplektajxo. Laud lauxdi. Laudable lauxdebla. Laudation lauxdego. Laugh ridi. Laughable ridinda. Laughter ridado. Laundress lavistino. ...
— English-Esperanto Dictionary • John Charles O'Connor and Charles Frederic Hayes
... of the mighty dead. Everything in the room remains just as it was left by the fast failing hands of the octogenarian engineer. His well-worn, humble apron hangs dusty on the wall, the last work before him is fixed unfinished in the lathe, the elaborate machines over which his latest thoughts were spent are still and silent, as if waiting only for their master's hand again to waken them into life and work. Upon the shelves are crowds of books, whose ...
— Showell's Dictionary of Birmingham - A History And Guide Arranged Alphabetically • Thomas T. Harman and Walter Showell
... in detached book-cases. There were various benches against the walls between,—one a bookbinder's; another a carpenter's; a third had a turning-lathe; a fourth had an iron vice fixed on it, and was evidently used for working in metal. Besides these, for it was a large room, there were several tables with chemical apparatus upon them, Florence-flasks, retorts, sand-baths, and such like; while in ...
— Annals of a Quiet Neighbourhood • George MacDonald
... war. Whenever there is a war somebody makes money and everybody loses it. Now you see they're using a awful lot of sharpnel over there—bullets packed up in packages ready to be busted open. It takes a certain kind of lathe to turn them sharpnel, and there is only one kind of lathe in this country that does it faster than any other; and the people that makes sharpnel can't get enough of them. Well, I bought the control of that there lathe. Looking around not long ...
— The Man Next Door • Emerson Hough
... all practical purposes new metals. The difference in the appearance of brass and copper is familiar to everyone; brass is also much harder than copper and much more suitable for being turned in a lathe. Similarly, bell-metal is harder, more sonorous and more brittle than either of its components. It is almost impossible by mechanical means to detect the separate ingredients in such an alloy; we may cut or file or polish it without discovering any lack of homogeneousness. ...
— Project Gutenberg Encyclopedia
... their own way to make by and by, the Bhaers encouraged any efforts at independence. Tommy sold his eggs; Jack speculated in live stock; Franz helped in the teaching, and was paid for it; Ned had a taste for carpentry, and a turning-lathe was set up for him in which he turned all sorts of useful or pretty things, and sold them; while Demi constructed water-mills, whirligigs, and unknown machines of an intricate and useless nature, and disposed of them to ...
— Little Men - Life at Plumfield With Jo's Boys • Louisa May Alcott
... led on the Islands, had been delightful. King Corny, who had the command not only of boats, and of guns, and of fishing-tackle, and of men, but of carpenters' tools, and of smiths' tools, and of a lathe, and of brass and ivory, and of all the things that the heart of boy could desire, had appeared to Harry, when he was a boy, the richest, the greatest, the happiest of men—the cleverest, too—the most ingenious: for King Corny had with his own hands made a violin and a rat-trap; ...
— Tales & Novels, Vol. IX - [Contents: Harrington; Thoughts on Bores; Ormond] • Maria Edgeworth
... cruel reality, alas! to a multitude of unfortunate men and women. I refer to the working of the Hire System. The decent poor man or woman who is anxious to earn an honest penny by the use of, it may be a mangle, or a sewing-machine, a lathe, or some other indispensable instrument, and is without the few pounds necessary to buy it, must take it on the Hire System—that is to say, for the accommodation of being allowed to pay for the machine by instalments— he is charged, in addition to the full market value of ...
— "In Darkest England and The Way Out" • General William Booth
... than these rumors of war is the fact that my Tulp caught the small-pox, in the spring of '60, the malady having been spread by a Yankee who came up the Valley selling sap-spouts that were turned with a lathe instead of being whittled. The poor little chap was carried off to a sheep-shed on the meadow clearing, a long walk from our house, and he had to remain there by himself for six weeks. At my urgent request, ...
— In the Valley • Harold Frederic
... three nights in the haunted castle. The King looked at him, and as the youth pleased him, he said, "Thou mayest ask for three things to take into the castle with thee, but they must be things without life." Then he answered, "Then I ask for a fire, a turning lathe, and a cutting-board with the knife." The King had these things carried into the castle for him during the day. When night was drawing near, the youth went up and made himself a bright fire in one of the rooms, placed the cutting-board ...
— Household Tales by Brothers Grimm • Grimm Brothers
... Mosheur Lanark, just like gentlemen. I suppose it amused poor Rene. He hasn't much to do, except to fiddle about in the carpenter's shop. He's like all the French prisoners—always making knickknacks; and Jerry had a little lathe at his cottage, and so—and so—Rene took to being with Jerry much more than I approved of. The Hall is so big and empty when Dad's away, and I will not sit with old Amoore—she talks so horridly ...
— Rewards and Fairies • Rudyard Kipling
... concluded with an air of triumph, "the ends of firing pins are turned and finished in a lathe by the use of tools designed for that purpose. The metal tears and works unevenly so that microscopical examination shows many pits, lines, circles, and irregularities. The laws of chance are as much against two of these firing pins or hammers having the same appearance under the microscope ...
— Guy Garrick • Arthur B. Reeve
... wanted to go out for a walk, and they sent her to her room. She watched at the window as she peeled off her coarse garments and put her soft body into a rough nightgown as ill-cut and shapeless as she was neither. She had been turned by a master's lathe. ...
— We Can't Have Everything • Rupert Hughes
... service I have ever been privileged to attend. There were men there of every class, every position, every calling, every condition of life. The peasant had left his plow, the workman had left his lathe and his loom, the clerk had left his desk, the trader and the business man had left their counting houses, the shepherd had left his sunlit hills, and the miner the darkness of the earth, the rich proprietor had left his palace, and the man earning his daily ...
— New York Times Current History; The European War, Vol 2, No. 2, May, 1915 - April-September, 1915 • Various
... new boat about which some carpenters were pounding, and from a distance the skeleton of unpainted timber looked like the remains of some prehistoric saurian. Across the drain, some rope-walkers, hanks of hemp about their waists, were backing away from the lathe, letting the yellow strands revolve between their deft fingers. And then the Cabanal, so called from the miserable cabins there which sheltered the very poorest of all those toilers of the sea! The streets were as straight and regular as the buildings were capricious, of every shape ...
— Mayflower (Flor de mayo) • Vicente Blasco Ibanez
... that when he alluded to his foot-lathe in these enigmatic terms, the speaker meant to be impressive; and Creedle chimed in with, "Ah, young women do wax wanton in these days! Why couldn't she ha' bode with her father, and been faithful?" Poor Creedle was thinking of ...
— The Woodlanders • Thomas Hardy
... or still better in the line of the dip as above, and which is twisted when in that position, becomes magnetized with some degree of permanence. Many other instances are cited, such as fire-irons, lamp-posts, iron gates, lathe turnings, all of which often exhibit polarity, having been magnetized by ...
— The Standard Electrical Dictionary - A Popular Dictionary of Words and Terms Used in the Practice - of Electrical Engineering • T. O'Conor Slone
... surface and large oval head, loaded with lead, and of a form adapted to give a mortal blow on the skull without breaking the skin; the handle was suited for a firm grasp. Crowninshield said he turned it in a lathe. Joseph admitted he wrote the ...
— The Great Speeches and Orations of Daniel Webster • Daniel Webster
... expectancy which, so to say, makes a mould into which the plastic and as yet undifferentiated substance can flow and take the desired form. The will has much the same place in our mental machinery that the tool-holder has in a power-lathe: it is not the power, but it keeps the mental faculties in that position relatively to the power which enables it to do the desired work. If, using the word in its widest sense, we may say that the imagination is the ...
— The Edinburgh Lectures on Mental Science • Thomas Troward
... into grooves something like saw-teeth, are most used; but old knives, sail-needles, and chisels are pressed into service. The work turned out would, in many cases, take a very high place in an exhibition of turnery, though never a lathe was near it. Of course, a long time is taken over it, especially the polishing, which is done with oil and whiting, if it can be got—powdered pumice if it cannot. I once had an elaborate pastry-cutter carved ...
— The Cruise of the Cachalot - Round the World After Sperm Whales • Frank T. Bullen
... they give rise to disease; and in spite of the not materially unhealthy work, the children are puny, weak, and, in many cases, severely crippled. In Willenhall, for instance, there are countless persons who have, from perpetually filing at the lathe, crooked backs and one leg crooked, "hind- leg" as they call it, so that the two legs have the form of a K; while it is said that more than one-third of the working-men there are ruptured. Here, as well as in Wolverhampton, numberless cases were found of retarded puberty among ...
— The Condition of the Working-Class in England in 1844 - with a Preface written in 1892 • Frederick Engels
... be bored, it is convenient to mount the file in the lathe and use a bit of flat hard wood to press up the glass by means of the back rest. A drilling machine, if not too heavy, does very well, and has the advantage of allowing the glass to remain horizontal so that plenty of oil can ...
— On Laboratory Arts • Richard Threlfall
... that water privilege, worth three or four thousand dollars, twice as good as what Governor Cass paid fifteen thousand dollars for. I wonder, Deacon, you don't put up a carding mill on it; the same works would carry a turning lathe, a shingle machine, a circular saw, grind ...
— The Clockmaker • Thomas Chandler Haliburton
... thus found were utilized, because they had set up a workshop alongside the sawmill, and in it had a crude lathe adapted to work in wood or iron. It will thus be seen that each tour was for prospecting purposes, to supply their needs, as well as to ...
— The Wonder Island Boys: The Mysteries of the Caverns • Roger Thompson Finlay
... give me a shoulder now, and we'll take her out to daylight. After that you keep out of the way till the show starts—about four o'clock. All but two of you, that is. There's a bearing to grind on the lathe, and a couple of sets ...
— The Boy Scouts of the Air on Lost Island • Gordon Stuart
... almost ceased to listen, but the mother went on with her story: "A canty mon were my father, and he hadn't his marra for thackin' 'twixt Thirsk an' Malton. An' then there was t' mell-supper i' t' gert lathe, wi' singin' an' coontry dances, an' guisers that had blacked their faces. And efter we'd had wer suppers, we got agate o' dancin' i' t' leet o' t' harvist-moon; and reet i 't' middle o' ...
— Tales of the Ridings • F. W. Moorman
... scowling at the little, sleeping houses on either side, with their storm-windows and covered back porches. They were flimsy shelters, most of them poorly built of light wood, with spindle porch-posts horribly mutilated by the turning-lathe. Yet for all their frailness, how much jealousy and envy and unhappiness some of them managed to contain! The life that went on in them seemed to me made up of evasions and negations; shifts to save cooking, to save washing and cleaning, devices to propitiate ...
— My Antonia • Willa Sibert Cather
... that the stick itself should be light in weight, light in color, and from sixteen to twenty inches long. It must be thin and flexible, and should taper gradually from the end held in the hand to the point. Batons of this kind can be manufactured easily at any ordinary planing mill where there is a lathe. The kinds sold at stores are usually altogether too thick and too heavy. If at any time some adulating chorus or choir should present the conductor with an ebony baton with silver mountings, he must not feel that courtesy demands that it should ...
— Essentials in Conducting • Karl Wilson Gehrkens
... inventor, pulling over some old dust-covered machines in a corner, came loud cries of surprise. The cries were natural indeed. In that heap of rubbish he had found a lathe for turning irregular forms, and a screw-cutting engine once used by Peter himself: specimens of his unfinished work were still in them. They had lain there unheeded a hundred fifty years; their principle had died with Peter and his ...
— The Great Events by Famous Historians, Vol. 17 • Charles Francis Horne
... painful little chairs standing in the long, high, dim, rather sorrowful hall disclosed beyond the open double doors. They were stiff little chairs of an inconsequent, mongrel pattern; armless, with perforated wooden seats; legs tortured by the lathe to a semblance of buttons strung on a rod; and they had that day received a streaky coat of a gilding preparation which exhaled the olfactory vehemence mentioned. Their present station was temporary, their purpose, ...
— The Flirt • Booth Tarkington
... sight reading a favorite book. Inside it was but a commonplace London house, only one room, perhaps, differing from any one that might have been found in any other house in the square. That was my grandfather's "work-room", where he had a lathe fitted up, for he had a passion and a genius for inventive work in machinery. He took out patents for all sorts of ingenious contrivances, but always lost money. His favorite invention was of a "railway chair", for joining ...
— Autobiographical Sketches • Annie Besant
... remarkable, and yet less unexpected, than the perfect identity of things manufactured by the same tool. If the top of a circular box is to be made to fit over the lower part, it may be done in the lathe by gradually advancing the tool of the sliding-rest; the proper degree of tightness between the box and its lid being found by trial. After this adjustment, if a thousand boxes are made, no additional care is required; the tool is always carried ...
— On the Economy of Machinery and Manufactures • Charles Babbage
... pronounce it to be a long time, but not how long; because when we say "how long," we do it by comparison; as, "this is as long as that," or "twice so long as that," or the like. But when we can mark the distances of the places, whence and whither goeth the body moved, or his parts, if it moved as in a lathe, then can we say precisely, in how much time the motion of that body or his part, from this place unto that, was finished. Seeing therefore the motion of a body is one thing, that by which we measure ...
— The Confessions of Saint Augustine • Saint Augustine
... not fit for their jobs. The employment of men—the direction of their energies, the arranging of their rewards in honest ratio to their production and to the prosperity of the business—is no small job. An employer may be unfit for his job, just as a man at the lathe may be unfit. Justifiable strikes are a sign that the boss needs another job—one that he can handle. The unfit employer causes more trouble than the unfit employee. You can change the latter to another more suitable job. But the former must usually be left to the law of compensation. The justified ...
— My Life and Work • Henry Ford
... open space, and there were great heaps of curly yellow shavings, and strange-looking smooth pieces of wood carefully arranged in piles. Two little sheds stood at some distance from each other, and in one of these sat a man turning a piece of wood in a rudely fashioned lathe; as he finished it he handed it to a boy kneeling at his feet, who supplied him with more wood, and sang at his work in a loud, clear voice. And then a still more interesting object caught Frank's ...
— Our Frank - and other stories • Amy Walton
... ship, which, after having been mercilessly pounded and battered into shape by the giant Nasmith hammers, was coolly seized by only a couple of men, and by them easily carried into the machine-shop, there to receive its finishing touches in the lathe. ...
— The Log of the Flying Fish - A Story of Aerial and Submarine Peril and Adventure • Harry Collingwood
... of making the willow hampers for fruit-growers, of whom there were a good many round Cowfold, and who sent their fruit to London, stacked high on huge broad-wheeled waggons. Didymus also manufactured hand-baskets, all kinds of willow ware and white wood goods. He had a peculiar aptitude for the lathe, and some of his bread-plates were really as neatly executed as any that could be seen in London. He had even turned in poplar some vases, which found their way to a drawing-master, and were used as models. He was now about thirty, had yellow hair, blue eyes, a smiling face, widish mouth, always ...
— Miriam's Schooling and Other Papers - Gideon; Samuel; Saul; Miriam's Schooling; and Michael Trevanion • Mark Rutherford
... are elaborating an invention, you go into a special laboratory, where you are given a place, a carpenter's bench, a turning lathe, all the necessary tools and scientific instruments, provided only you know how to use them; and you are allowed to work there as long as you please. There are the tools; interest others in your idea; join with fellow workers skilled in ...
— The Conquest of Bread • Peter Kropotkin
... opinion as counts says 'Thou shalt not', the fallacious substitution of 'shalt not' for 'mayst' cannot fail to endanger advancement. It may be over the chipping of a flint axe, or a trade-union rule about a high-speed lathe; but if the craftsman conforms to opinion as such, and not through positive concurrence of his own judgement with it, he has accepted the fallacious conclusion as his own, and lets his work fall to second-hand ...
— The Unity of Civilization • Various
... Cicero.[110:2] There is a strange shadow of sadness hanging over this wise and kindly faith, which proceeds from the essential distrust of life that lies at its heart. The best that Epicurus has really to say of the world is that if you are very wise and do not attract its notice—Lathe biosas—it will not hurt you. It is a philosophy not of conquest but of escape. This was a weakness from which few of the fourth-century thinkers completely escaped. To aim at what we should call positive happiness was, to the Epicureans, only to ...
— Five Stages of Greek Religion • Gilbert Murray
... in Africa means, would send out a billiard-table and a good lathe: he also proposed a skittle- or bowling-alley, a ground for lawn-tennis under a shed, an ice-machine and one for making soda-water. Each establishment would have its library, a good atlas, a few works of reference, and treatises on mining, machinery, and natural ...
— To The Gold Coast for Gold, Vol. II - A Personal Narrative • Richard Francis Burton and Verney Lovett Cameron
... age, their hygiene and fullest development; and next, the closest connection with science at every point should do the same for the intellect. Each operation and each tool—the saw, knife, plane, screw, hammer, chisel, draw-shave, sandpaper, lathe—will be studied with reference to its orthopedic value, bilateral asymmetry, the muscles it develops, and the attitudes and motor habits it favors; and uniformity, which in France often requires classes to saw, strike, plane up, down, right, left, all together, upon count and command, ...
— Youth: Its Education, Regimen, and Hygiene • G. Stanley Hall
... his hands from it for sixteen hours together. In general he was never unemployed at meals, but was always at those times contriving or making drawings of whatever came in his mind. Generally I was obliged to read to him whilst he was at the turning-lathe, or polishing mirrors—Don Quixote, Arabian Nights' Entertainments, the novels of Sterne, Fielding, &c.; serving tea and supper without interrupting the work with which he was engaged, ... and sometimes lending a hand. I became, in time, as ...
— Pioneers of Science • Oliver Lodge
... of a 3-in. cornice pole made to fit a bay window; the straight portions of the pole are generally turned in the lathe, the corner portions being afterwards jointed and worked up to the required shape. To avoid any difficulty in the setting out of the dowels, a disc of cardboard or sheet metal is made to the same diameter ...
— Woodwork Joints - How they are Set Out, How Made and Where Used. • William Fairham
... and doth well enrich the ancient fiction. For he feigneth that at the end of the thread or web of every man's life there was a little medal containing the person's name, and that Time waited upon the shears, and as soon as the thread was cut caught the medals, and carried them to the river of Lathe; and about the bank there were many birds flying up and down, that would get the medals and carry them in their beak a little while, and then let them fall into the river. Only there were a few swans, which if they got a name would carry it to a temple where it was consecrate. And although ...
— The Advancement of Learning • Francis Bacon
... just as they had been dropped when this nightmare of destructive passion burst upon the world; weather-reddened traveling cranes rusted to the tracks on which they will never move again; trucks overturned, a lathe smashed by a shell that had torn a wide gap in the roof above. Here, where the air used to tremble all day long with the clang of giant hammers, there was now silence and desertion, and the offices from which great ships were controlled on their voyages to far-off seas ...
— World's War Events, Volume III • Various
... over the eastern bulge of the African coast, he sighted what was probably the ECM lathe he was after, and kicked towards it, simultaneously pulling his pistol-gripped Rate of Approach Indicator from ...
— Where I Wasn't Going • Walt Richmond
... horizontal observations. Another apparatus provides for the detection and measurement of the flexure of the tube. Much trouble was experienced in securing a good casting for the steel axis of the instrument. Three were found imperfect under the lathe, and the fourth was chosen; but even then the pivots were made in separate pieces, which were set in very deeply and welded. Dr. Gould said he had been requested by the gentlemen who had this enterprise in charge to suggest, as a mark of respect to a gentleman of Albany who ...
— The Uses of Astronomy - An Oration Delivered at Albany on the 28th of July, 1856 • Edward Everett
... work east of it, and its site must have been broadened when the tower was first planned. At Jarrow there is no Roman stone-work; but one type of Roman masonry has been imitated by the builders in the walls of the chancel, and small decorative shafts, turned in a lathe after the Roman fashion, such as exist at Monkwearmouth, have been found in the building. The inscribed stone, recording the dedication of the church, is preserved in the wall above the western tower-arch: ...
— The Ground Plan of the English Parish Church • A. Hamilton Thompson
... the trade, and who if called on to perform work requiring the use of a machine tool different from the one on which they are employed are unable to do so. There are hundreds of drill press hands who cannot operate a milling machine, lathe hands who know nothing of planer work, and so on. The subdivision of these occupations follows closely the advance in invention, so that employers advertising for help frequently specify not only the machine tool to be used but add the name ...
— Wage Earning and Education • R. R. Lutz
... might be taken blindfold and declare where each kind grew. Hedges of geranium seven feet high! Think of that, ye Dicksons and nursery-ground men about Brompton and the King's Road! The stalks a mass of real ligneous matter, fit for the turner's lathe if it were but hard enough. A small mound enables us to look about us more at large; and now we discern the stately bamboo, thicker than your arm, and tall as a small mast; and the sugar-cane, formerly cultivated for his juice, but now looking as if he were ill-used ...
— Blackwood's Edinburgh Magazine, No. CCCXXXII. - June, 1843.,Vol. LIII. • Various
... material a shape closely similar to that of the finished brilliant but rough and without facets. This shaping or "cutting" as it is technically called, is done by placing the rough stone in the end of a holder by means of a tough cement and then rotating holder and stone in a lathe-like machine. Another rough diamond (sometimes a piece of bort, unfit for cutting, and sometimes a piece of material of good quality which it is necessary to reduce in size or alter in shape) is cemented into another holder and held against the surface of ...
— A Text-Book of Precious Stones for Jewelers and the Gem-Loving Public • Frank Bertram Wade
... more than once in the market buying land, and notably, in 1633, acquired the manor of Stowting Court. This was an estate of some 320 acres, six miles from Hythe, in the Bailiwick and Hundred of Stowting, and the Lathe of Shipway, held of the Crown in capite by the service of six men and a constable to defend the passage of the sea at Sandgate. It had a chequered history before it fell into the hands of Thomas of Eythorne, having been sold and given from one to ...
— The Works of Robert Louis Stevenson, Volume 9 • Robert Louis Stevenson
... a large proportion, usually about one fourth, of alumina, or argil; but in common language, any earth which possesses sufficient ductility, when kneaded up with water, to be fashioned like paste by the hand, or by the potter's lathe, is called a CLAY; and such clays vary greatly in their composition, and are, in general, nothing more than mud derived from the decomposition or wearing down of rocks. The purest clay found in nature is porcelain clay, or kaolin, which results from the decomposition ...
— The Student's Elements of Geology • Sir Charles Lyell
... calculated from 1 to 60, have been found at Senkera, and a people who were acquainted with the sun-dial, the clepsydra, the lever and the pulley, must have had no mean knowledge of mechanics. A crystal lens, turned on the lathe, was discovered by Layard at Nimrud along with glass vases bearing the name of Sargon; this will explain the excessive minuteness of some of the writing on the Assyrian tablets, and a lens may also have been used in the observation of ...
— Encyclopaedia Britannica, 11th Edition, Volume 3, Part 1, Slice 1 - "Austria, Lower" to "Bacon" • Various
... banner of one of the guilds at the celebration of the four-hundredth anniversary of the founding of the Munich Cathedral. Jesus of Nazareth, as a beautiful boy and with a nimbus encircling his head, was shown turning and shaping the globe on a lathe, which he keeps in motion with his foot. The emblems of the Passion are about him, God the Father looking approvingly upon him from a cloud, and the dove hovering between the two. The date upon ...
— History of the Warfare of Science with Theology in Christendom • Andrew Dickson White
... Diego set it tight with a twang. Napoleon Bonaparte and George Washington rushed headlong upon her and hung to horns and ears; while the man from Michigan fastened a grip on her lifted tail, as she tore past him, which straightened him out like a lathe. As to myself, I could only stand and gaze with solicitude upon the terrific contest, on the issue of which depended not only the chances of my speculation, but even the ...
— The Busted Ex-Texan and Other Stories • W. H. H. Murray
... she remembered, too, how in another department an old man with one eye had been filing a piece of iron, and how the iron filings were scattered about; and how a red-haired man in black spectacles, with holes in his shirt, had been working at a lathe, making something out of a piece of steel: the lathe roared and hissed and squeaked, and Anna Akimovna felt sick at the sound, and it seemed as though they were boring into her ears. She looked, listened, did ...
— The Party and Other Stories • Anton Chekhov
... for turning wood or small metal articles, may be easily made at very little expense. A lathe of this kind is shown in the cut (Fig. 1), where A is the headstock, B the bed and C the tailstock. I run my lathe by power, using an electric motor and countershaft, but it could be run by foot power if desired. A large cone ...
— The Boy Mechanic: Volume 1 - 700 Things For Boys To Do • Popular Mechanics
... machine ship is working at a lathe. An officer of the company comes into the shop, a gentleman in white collar and good clothes! He stands behind the mechanic and "curses him out" because his work is inefficient. When he turns away, the man at the lathe says, "Who was that guy anyway? What business has he to ...
— Etiquette • Emily Post |
